Reset Epson L3252

Resetting the counter is a maintenance bypass, not a repair. If you see actual ink pooling under the printer or on your prints, stop using the printer immediately. That indicates the waste pads are physically saturated. In that case, you must open the printer, remove the pads, rinse them (messy), or install a waste ink tank kit. Resetting a printer with saturated pads will eventually ruin the printer’s electronics.

Hold them until the and Wi-Fi Direct lights begin flashing alternately.

You should try this first for any unresponsive behavior, a stuck print job, a paper jam that has been cleared but the error persists, or when the printer isn't connecting to your computer. This method does not delete any settings or stored data. reset epson l3252

Many heavy users choose to redirect the internal waste tube. By drilling a small hole or routing the internal tube out of the back casing, you can drain excess ink directly into an external plastic bottle, eliminating the need to ever replace the internal pads again.

If you cannot find a free adjustment program, the most reliable paid tool is (Waste Ink Counter Reset). Resetting the counter is a maintenance bypass, not a repair

On the new screen, check the boxes next to , Platen pad counter , and Ink system pad counter (options may vary slightly depending on the exact software version).

:

Press and hold the Network Status button (the "i" icon or Wi-Fi button) and the Power button simultaneously.

Only clean the print head when absolutely necessary (visible banding or missing colors). Each cleaning uses 10–20% of the waste ink budget. In that case, you must open the printer,

To reset the Epson L3252 using the most common method, you will need: