Note: Always double-check the manual included with your specific door camera model. While the colors above are standard for Commax, variations exist in different production years.
Connect these terminals directly to the corresponding Terminals 1 and 2 on the outdoor door station (e.g., Commax DR-2GN or DR-2L).
Commax DP-RA01 is a 1-to-2 audio intercom system notable for its flexible installation options and simplified 2-wire connectivity for basic functions. Key Installation Features Flexible Mounting : The unit is designed for both wall mounting , allowing you to choose the best placement for your space. Simplified 2-Wire Connection
This comprehensive guide provides detailed, step-by-step instructions for the installation, wiring, and operation of the Commax DP-RA01 audio door phone system. The Commax DP-RA01
⚠️ Note: Because the original manual is difficult to locate, Label your wires before connecting them. commax dp-ra01 installation manual
While holding the handset, press the key/lock symbol button. Confirm that the electric strike or gate mechanical latch releases immediately. Troubleshooting Common Problems
Check if the AC plug is securely seated in the live wall outlet. Verify that the home circuit breaker has not tripped.
Secure the bracket firmly to the wall using the mounting screws. Step 3: Wiring Connections
If you are still having trouble with the installation, could you please provide details on what part of the setup is failing? For instance, are you having trouble with the wiring or the power connection? Note: Always double-check the manual included with your
The DP-RA01 is polarity sensitive . Swapping terminals 1 and 2 will permanently damage the unit.
If your setup controls an electric door strike via the handset, route the dedicated dry-contact trigger wires through the designated door-lock terminals on either the handset or the master unit, depending on your system scheme.
Verify the external power supply for your electric strike lock is functioning.
The DP-RA01 is typically wall-mounted using a provided bracket. Commax DP-RA01 is a 1-to-2 audio intercom system
Use a pencil to mark the two screw hole locations through the bracket slots.
Fix the wall-mounting bracket firmly to the wall using the provided screws.
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.