Ideally set between 40°C and 55°C to prevent scalding and reduce limescale buildup. Troubleshooting Common Error Codes
: Similar to E05, but related to the sensor that monitors the domestic hot water (tap water) temperature. A loose connection or a faulty sensor could be the cause.
: 72.5 cm (Height) x 40 cm (Width) x 30 cm (Depth); weight is approximately 38 kg. Key Installation & Operating Guidelines
Schedule an annual service to clean the primary heat exchanger, check expansion vessel charge, and test safety valves.
Plug the boiler into a grounded electrical outlet (use of a voltage regulator is highly recommended). Filling the System Lambert Lx 24 Fi Manual English
If you have recently purchased a —a popular, high-efficiency condensing boiler used in residential and light commercial heating systems—you already know that having the original documentation on hand is critical. However, finding a clear, accessible Lambert Lx 24 Fi Manual English version can sometimes be a challenge. Whether you have misplaced your physical copy or need immediate answers to error codes, installation questions, or maintenance schedules, this article serves as a comprehensive, manual-style guide.
| Parameter | Value | |-----------|-------| | Central heating max output | 23.8 kW | | DHW output (ΔT 30°C) | 13.2 L/min | | Efficiency rating (condensing mode) | Up to 98% | | Dimensions (HxWxD) | 700 x 400 x 270 mm | | Weight (dry) | 31 kg | | Electrical supply | 230V ~ 50Hz | | Maximum operating pressure (CH/DHW) | 3 bar / 10 bar |
Although this article compiles key operational information, it does not replace the official user manual. Here are the best ways to locate it:
The Lambert Lx 24 Fi manual is a comprehensive guide that provides detailed information on the installation, operation, and maintenance of your boiler. The manual is divided into several sections, each covering a specific aspect of the appliance. Ideally set between 40°C and 55°C to prevent
Requires a 220-230 V grounded power supply. If voltage fluctuates outside the 195 V – 255 V range, a voltage regulator is recommended.
The Lambert Lx 24 Fi is a high-efficiency wall-mounted gas boiler known for its reliability and compact design. While finding a physical copy of the manual can be difficult, this guide provides the essential technical specifications, operating instructions, and troubleshooting steps typically found in the English version of the manufacturer’s documentation.
Based on Baymak/Baxi manuals, these are the most common error codes: Error Code Potential Cause Action in English No Ignition Check gas supply, reset boiler. E03 Chimney/Flue Fault Check if the chimney is blocked or blocked. E10 Low Water Pressure Refill the system via the filling loop. E35 Flame Interference Reset the boiler; call for service if it persists. 5. Energy Saving Tips Set your room thermostat between 18°C and 21°C.
To ensure the longevity of your Lambert Lx 24 Fi, an annual service by a certified gas engineer is highly recommended. During a service, the technician should: Clean the primary heat exchanger. Check the expansion vessel pressure. Inspect the flue for leaks or blockages. Test the gas valve settings and combustion efficiency. Filling the System If you have recently purchased
The heating temperature sensor is damaged or disconnected. Call a technician. Domestic Hot Water NTC Sensor Fault
Connects to the radiator supply line.
Understanding the core specifications of your appliance ensures safe and optimized operation.