Satlink Ws6906 Software Upgrade Jun 2026

: Connect the RS-232 cable to your PC and the USB/serial port on the WS-6906. Keep the finder turned OFF initially. Run Updater : Launch the SatlinkTools

Before you begin, you need to identify your hardware version and gather the necessary tools.

This indicates a corrupted flash or incompatible firmware file version. You must re-flash the device using the original factory backup firmware file via the exact same method. Best Practices After a Software Upgrade

Click to modify the satellites/transponders (236KB file).

Corrects menu typos and improves overall user interface navigation. Prerequisites: What You Need Before Upgrading satlink ws6906 software upgrade

: A specific executable (often called "Upgrade.exe") designed for the Satlink chipset.

Software updates, often containing updated satellite and transponder databases (often in a .bin file format), are crucial. Key benefits include:

Plug the AC adapter into the Satlink to guarantee a stable power supply. Step 3: Configure the Flash Upgrade Tool

Once your upgrade finishes successfully, perform these final steps to get your unit field-ready: : Connect the RS-232 cable to your PC

The WS6906 has been manufactured in different hardware revisions over the years. Installing firmware meant for a different revision will damage the device.

while the progress bar fills up.

Firmware versions released post-2016 specifically addressed frequent crashes and improved the "purity" of the signal readout.

Adds or corrects multi-language menu translations. Required Tools and Equipment This indicates a corrupted flash or incompatible firmware

There is virtually no online backup firmware available for the newer version, and Satlink appears to have discontinued both the model and official upgrade support for it.

Connect the 9-pin RS232 end into your PC's serial port or USB adapter.

Users typically seek a WS6906 software update for several reasons:

If you are using a USB-to-RS232 adapter, plug it into your computer first. Install the latest drivers for the adapter's chipset. Open your PC’s and look under Ports (COM & LPT) to verify which COM port number (e.g., COM3) has been assigned to your adapter. Step 2: Connect the Satellite Finder Turn OFF the Satlink WS6906 power switch.

Check that your COM port number matches exactly in Device Manager. Ensure you turned on the Satlink after clicking start, not before. Progress Bar Stalls at 0%