Inspect the clock for any damage or defects. Check the LED display, mirror surface, and buttons for any signs of wear or damage. If you notice any issues, contact the manufacturer or supplier immediately.
Press and hold the button for 3 seconds to configure the schedule.
Press once to confirm. The hour digits will begin to flash.
The DT-6507 LED Mirror Clock is a stylish and practical addition to any home. With its clear instructions and user-friendly interface, you'll be enjoying its many functions in no time. dt-6507 led mirror clock instructions
Night Mode automatically lowers the screen brightness during late hours to prevent sleep disruption.
: Automatically cycles between Time (10s), Date (5s), and Temperature (5s). To toggle this, go to temperature mode and hold until you hear a beep. Alarm and Snooze Features INSTRUCTION MANUAL
: After each successful setting adjustment, the display will automatically exit setting mode if no buttons are pressed for approximately 10 seconds. Inspect the clock for any damage or defects
Before adjusting any settings, ensure you are in the . The display should show the current time (hours and minutes). Press MODE repeatedly to cycle through display modes and return to the main time display.
the MODE button. The Year (default 2018 or current) will flash. Use UP/DOWN to set the year, then press MODE .
: You can set a timeframe (default often 18:00 to 06:00) where the clock automatically dims. This is usually toggled by pressing MODE until "ON/OFF" appears for Night Mode, then using UP/DOWN to adjust. Power and Memory Press and hold the button for 3 seconds
: It often uses AAA batteries or a small button cell as a backup to maintain time and alarm settings during power outages. Note that the display may turn off to save energy when on battery power unless waked by sound. Led Mirror Digit Clock Alarm Settings
If you choose the 12-hour clock format, a small LED dot will illuminate on the left side of the screen during afternoon and evening hours (12:00 PM to 11:59 PM). If the dot is missing, the clock is displaying AM time.