Phison Mpall V5.13.0c High Quality Jun 2026
MPALL will only work if your USB drive contains a Phison chip. Do not guess. Download a hardware identification utility such as or Flash Drive Information Extractor (FDIE) . Insert your drive and check for the following strings: Controller Vendor : Phison Controller Part-Number : (e.g., PS2251-07, PS2251-09)
: You may need specific Burner (BN) and Firmware (FW) binary files matching your controller and NAND type (e.g., MLC or TLC). Basic Recovery Guide
Download the Phison MPALL V5.13.0C package. Ensure you also have the correct and Firmware File (.bin) specifically for your controller version. 2. Configure the Tool Run MPALL_F1_9000_v513_0C.exe as Administrator.
(Phison’s release notes typically combine bug fixes, NAND/SSD profile additions, and utility updates; below are the kinds of changes expected and their practical implications.)
The status box will cycle through phases: Test IC , Format , Burner , and Write FW . Phison Mpall V5.13.0c
Click on the button on the right side of the main menu.
The version number, "v5.13.0C," indicates this is the fifth major release, with the "C" likely representing a specific iteration or revision of the software that targets certain controller families [0†L13-L14].
Wait for the progress bar to turn green. during this process. Common Troubleshooting "CT - Read Config File Error"
The future outlook for Phison Mpall V5.13.0c is promising. As the demand for high-performance storage solutions continues to grow, Phison is likely to continue to develop and improve its firmware. Some potential areas of development include: MPALL will only work if your USB drive
Security / firmware integrity
Before starting:
Mastering Phison MPALL V5.13.0C: The Ultimate Guide to USB Firmware Repair
| Error | Meaning | Solution | |--------|---------|----------| | 0x1042 | Flash ID mismatch | Wrong IC Type or firmware. Try Auto or different series. | | 0x1106 | Low-level format fail | Use Erase All Blocks + Low Level Format . Try different USB port (2.0). | | 0x4023 | ISO too large | Reduce ISO size or switch to mode 2 (public only). | | 0x1025 | Timing DLL error | Copy IDBLK_TIMING.dll from another MPALL version. | | Red bar, no code | Driver conflict | Uninstall USB drivers in Device Manager, restart, retry. | Insert your drive and check for the following
When to contact vendor support
Phison Mpall V5.13.0c is a firmware developed by Phison Electronics, a leading Taiwanese company that specializes in designing and manufacturing NAND flash controllers and other related products. The firmware is designed to work with Phison's range of NAND flash controllers, which are used in various applications such as solid-state drives (SSDs), USB flash drives, and other storage devices.
Right-click MPAll_F1_7F00_v513_0C.exe and select .
Phison MPALL (Mass Production Tool) is an official proprietary software suite used by manufacturers and technicians. The version is specifically optimized for a distinct generation of Phison microcontrollers (such as the PS2251 series).
: Dividing the flash drive into a fixed "read-only" ISO partition and a standard storage partition.
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.